2
In the
Camera Sounds
highlight the volume level you
prefer.
3
Press
Menu/OK
and return to the
The new setting remains in effect until
it is changed again, even when you turn the camera off.
Focus Assist Light
Sometimes in low-light situations, the camera will use the red
focus assist light on the front of the camera to aid in focusing.
This setting allows you to turn off this light (for example, when
you do not want the focus assist light to distract the subject of
your picture).
The default
Focus Assist Light
1
In the
Setup Menu
select
Focus Assist Light.
2
In the
Focus Assist Light
highlight
Auto
3
Press
Menu/OK
setting and return to the
Menu.
NOTE
HP recommends leaving this setting at Auto, since
turning it off hinders the ability of the camera to focus
correctly in low light.
The new setting remains in effect until it is changed again, even
when you turn the camera off.
Chapter 6: Using the Setup Menu
sub-menu,
to save the setting
Setup
Menu.
setting is Auto.
(page 115),
sub-menu,
or Off.
to save the
Setup
117