Creating Recovery Discs - HP EliteBook 6930p Maintenance And Service Manual

Creating recovery discs

After setting up the computer, create a set of recovery discs for the initial backup of the entire hard
drive.
NOTE:
This process may take over an hour, depending on your computer speed and the amount of
data being stored.
The recovery discs are used to start up (boot) the computer and recover the operating system and
software to factory settings in case of system failure.
Note the following tips for creating recovery discs:
●
Connect the computer to AC power during the process.
●
Use any of the following types of discs (purchased separately): CD-R, CD-RW, DVD+R, DVD+R DL,
DVD-R, DVD-R DL, or DVD±RW. The discs you use will depend on the type of optical drive
installed in your computer.
NOTE:
reduce the number of recovery discs required.
● Number each disc before inserting it into the optical drive of the computer.
To create a set of recovery discs:
1. Select Start > All Programs > Maintenance > Backup and Restore Center.
2. Click Back up computer.
3.
Follow the on-screen instructions.
NOTE: Windows includes the User Account Control feature to improve the security of your computer.
You may be prompted for your permission or password for tasks such as installing software, running
utilities, or changing Windows settings. Refer to Help and Support for more information.
138 Chapter 8 Backup and recovery in Windows Vista
DVDs and DVDs with double-layer (DL) support store more information than CDs and will