Table of Contents
Advertisement
Refer to Figure 1 for the location of the following mixer
components.
1.
Ventilation Slits — These openings allow ventilation to
the unit to prevent overheating.
2.
Safety Lock-off Button — Prevents the unit from being
operated accidentally.
3.
Protection Frame — Protects the machine casing from
dirt and breakage.
4.
ON/OFF Switch with Speed Control — Turns the power
on and off and regulates the mixing speed.
PAGE 12 — CX-HF SERIES HAND MIXERS — OPERATION AND PARTS MANUAL — REV. #3 (03/11/08)
CX-HF SERIES HAND MIXERS — COMPONENTS
1
6
8
Figure 1. Mixer Major Components
2
4
3
5
7
9
5.
Gear Selection Lever — This lever is used to select the
gear (slow or fast) at which the unit is operating (not
applicable on CX100HF/CX100HFE).
6.
Protection Frame Fastening Screws — Holds the
protection frame securely in place.
7.
Machine Neck — The mixing tool is attached to the
machine neck.
®
8.
HEXAFIX
Quick Action Coupling — This connector
attaches the mixing tool to the machine neck.
9.
Mixing Tool — This tool is used to mix chemical building
products.
Advertisement
Table of Contents
