Setting Mode - Electrolux ESL 6610RO User Manual

7.2 Setting and starting a
program
The Auto Off function
To decrease the energy consumption, this
function automatically deactivates the ap-
pliance a few minutes after:
• You have not closed the door to start
the program.
• The program is completed.

Setting mode

For some settings it is necessary that the
appliance is in setting mode.
Press the on/off button to activate the ap-
pliance. The appliance is in setting mode
when the display shows programme P1.
If the control panel does not show this
condition, press and hold at the same
time Program and MyFavourite until the
display shows programme P1.
Starting a program without delay
start
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode.
2. Set a program. Press Program again
and again until the display shows in-
termittently the number and the dura-
tion of the program you want to set. If
you want you can set the applicable
options.
• If you want to set the MyFavourite
program, press MyFavourite.
3. Close the appliance door. The pro-
gram starts. The program duration
starts to decrease with steps of 1 mi-
nute.
Starting a program with delay
start
1. Set the program.
2. Press Delay again and again until the
display shows the delay time you want
to set (from 1 to 24 hours).
• The display shows intermittently the
program number, the program du-
ration and the delay time.
• The Delay indicator comes on.
3. Close the appliance door. The count-
down starts.
• When the countdown is completed,
the program starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
When you cancel the delay start you have
to set the program and options again.
Press and hold, at the same time, Pro-
gram and MyFavourite until the display
shows program P1.
Cancelling the program
1. Press and hold, at the same time,
Program and MyFavourite until the
display shows program P1.
Make sure that there is detergent
in the detergent dispenser before
you start a new program.
At the end of the program
When the programme is completed, the
display shows 0:00.
1. Press the on/off button or wait for the
Auto Off function to automatically de-
activate the appliance.
2. Close the water tap.
Important
• For better drying results, keep the door
ajar for some minutes before you re-
move the dishes.
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
ENGLISH 13