Processor And Heatsink Installation - Supermicro X7DWE User Manual

X7DWE User's Manual
2-2

Processor and Heatsink Installation

When handling the processor package, avoid placing direct pressure on
!
the label area of the fan.
Notes:
1. Always connect the power cord last and always remove it before adding, re-
moving or changing any hardware components. Make sure that you install the
processor into the CPU socket before you install the CPU heatsink.
2. Intel's boxed Xeon CPU package contains the CPU fan and heatsink assem-
bly. If you buy a CPU separately, make sure that you use only Intel-certifi ed
multi-directional heatsink and fan.
3. Make sure to install the motherboard into the chassis before you install the
CPU heatsink and fan.)
4. When purchasing an LGA 771 CPU or when receiving a motherboard with an
LGA 771 CPU pre-installed, make sure that the CPU plastic cap is in place,
and none of the CPU pins are bent; otherwise, contact the retailer immedi-
ately.
5. Refer to the MB Features Section for more details on CPU support.
Installing an LGA771 Processor
1. Press the socket clip to release the
load plate, which covers the CPU
socket, from its locking position.
2. Gently lift the socket clip to open the
load plate.
3. Use your thumb and your index fi nger
to hold the CPU at the North Center
Edge and the South Center Edge of
the CPU.
Socket Clip
Load Plate
North Center Edge
South Center Edge
2-2