Freezer Bottom Bin; Spillsafe™ Glass Shelves; Slide Away Glass Shelf - Electrolux EHE5167S User Manual

16
USING YOUR aPPLIaNCE

Freezer bottom bin

To remove the bin, pull the drawer out until it is open all the
way then lift bin out from the front of the bin. When refitting
insert the rear of the bin first then lower into position.
Spillsafe™ glass shelves
Spillsafe™ glass shelves keep spills on the shelf. a shelf
retaining system minimises accidental movement of
shelves and they can be adjusted to various heights.
Spillsafe™ glass shelves are not to be used as slide out
shelves.
To remove the shelves, gently pull them forward until the
shelf comes clear of the shelf guides. To return the shelf,
make sure there is nothing behind that may obstruct
movement. Gently push the shelf into the cabinet and
back into position.
Slide away glass shelf (where fitted)
This shelf can be used either as a full depth shelf or when
tall items need to be stored at the front of the appliance it
can be collapsed to half its original depth.
To collapse the shelf:
1. Pull the front half of the shelf forward.
2. Then, from the underside, lift the front half of the shelf
by raising the rear edge over the recessed
hook detail.
Hook detail
3. Pull the shelf forward and allow the rear to drop into
the side channels.
4. Push the front shelf backwards (3,4) until it reaches
the rear stops.
Repositioning the shelf:
The shelf can be repositioned within the appliance
unit by pulling the whole assembly out until the side panels
are free to pivot down, then pivoting the rear of the shelf
until the shelf is free from the liner runners. The shelf can
then be positioned in any of the runners. This is a very
useful feature if your appliance door happens to have
limited access.