Operating Instructions; General Instructions - Hanns.G HX193 User Manual

OPERATING INSTRUCTIONS

GENERAL INSTRUCTIONS

Press the power button to turn the monitor on or off. The other control buttons are located on the
front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to
your personal preferences.
The power cord should be connected.
•
Connect the Signal cable from the monitor to the VGA card.
•
Press the power button to turn on the monitor. The power indicator will light up.
•
Menu / Return
▲ ► [＋]
Brightness adjustment button
▼◄ [－]
Volume adjustment button
Input source change/ Enter
《Digital Input Models》
Auto adjustment
《Analog Input Models》
Preset Mode Button
Power Button
Figure.4. Control Panel Buttons
13
User's Manual