Sony Ericsson Z500a White Paper page 50

Feature
Parameter set list
Parameter sets include
Factory pre-configuration
OTA
Security mechanism
Bearer
OTA via SMS
OTA via Cell Broadcast
Interface
Bearer
OTA via SMS
OTA via Cell Broadcast
Support for WAP
name,
homepage and homepage
title (1st bookmark
element),
proxy/GW address,
bookmarks (remaining
bookmark elements),
CSD phone number,
CSD data rate,
CSD dial type,
EDGE/GPRS APN,
protocol authentication,
GW authentication,
secure connection on/off
WAP/CSD, WAP/EDGE/GPRS (different sets)
WAP/CSD (possibility to lock a setting), WAP/EDGE/GPRS
WAP/CSD, WAP/EDGE/GPRS configuration possible
The Ericsson-Nokia
solution
Operator verification
through a code that can be
included in the OTA
configuration data.
This code is shown to the
user who can choose
installation or not.
-
The Ericsson-Nokia
solution
A question whether to
install, with the code if
available is asked. The user
may have to choose if to
create a new WAP profile or
to replace an existing WAP
profile.
-
46
White Paper
name,
homepage,
proxy/GW address,
CSD phone number,
CSD data rate,
CSD dial type,
CSD response timer,
EDGE/GPRS APN,
protocol authentication,
GW authentication,
EDGE/GPRS QoS
WAP Forum OTA
provisioning
Uses security mechanism (SEC)
methods according to WAP-183-
ProvCont-20010724-a (see
www.openmobilealliance.org).
According to ch.7.1.2,
WAP-184-ProvBoot-20010314-a (see
www.openmobilealliance.org).
WAP Forum OTA
provisioning
For NETWPIN the user is asked to
accept to install received settings. For
USERPIN, USERNETWPIN and
USERPINMAC the user is
subsequently asked to enter a PIN code
that is a shared secret between the
service provider and the user.
The user is asked whether to accept the
received settings or not.
Z500a
June 2004