Cisco RV130W Features & Specifications page 3

Specifications
IPv6
Network Edge (DMZ)
Layer 2
Security
Firewall
Access Control
Content Filtering
Secure Management
WPS
User Privileges
VPN
Gateway-to-gateway
IPsec VPN
Client-to-gateway
IPsec VPN
PPTP VPN
Encryption
Authentication
VPN Pass-through
Quality of Service
QoS
Jumbo Frame
Performance
NAT Throughput
Concurrent Sessions
IPsec VPN
Throughput
(3DES/AES)
Configuration
Web User Interface
© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Description
● Dual-stack IPv4 and IPv6
● 6to4 tunneling
● Stateless address auto-configuration
● DHCPv6 Server for IPv6 Clients on LAN
● DHCP v6 client for WAN connectivity
● Internet Control Message Protocol (ICMP) v6
● Static IPv6 Routing
● Dynamic IPv6 Routing with RIPng
Software configurable to any LAN IP address
802.1Q-based VLANs, 5 active VLANs
Stateful packet inspection (SPI) firewall, port forwarding and triggering, denial-of-service (DoS) prevention, software-
based DMZ
DoS Attacks Prevented:
● SYN Flood Detect Rate
● Echo Storm
● ICMP Flood
● UDP Flood
● TCP Flood
Block Java, Cookies, Active-X, HTTP Proxy
IP access control lists; MAC-based wireless access control
Static URL blocking or keyword blocking
HTTPS, username/password complexity
Wi-Fi Protected Setup
2 levels of access: admin and guest
10 gateway-to-gateway IPSec tunnels
10 client-to-gateway IPsec tunnels using TheGreenBow and ShrewSoft VPN client
10 PPTP tunnels for remote client access
Triple Data Encryption Standard (3DES)
MD5/SHA1
IPsec/PPTP/Layer 2 Tunneling Protocol (L2TP) pass-through
● 802.1p port-based priority on LAN port, application-based priority on WAN port
● 3 queues
● Differentiated Services Code Point support (DSCP)
● Class of Service (CoS)
● Bandwidth Management for service prioritization
Supports Jumbo Frame on Gigabit ports - at least 1536B
800 Mbps
12,000
50 Mbps
Simple, browser-based configuration (HTTP/HTTPS)
Page 3 of 5