Siemens CMTC1515 User Manual page 10

Hardware Installation
10
Siemens Building Technologies
Fire & Security Products
Mono sound application:
1. Input: Connect one of the AV1/AV2 audio cables (R or L) from the AV
equipment to R-IN or L-IN.
2. Output: Connect from R-OUT or L-OUT to the input of AV equipment.
NOTE:
If you connect the audio cables of AV1 and AV2 to R-IN and L-IN
simultaneously, the sound of AV1 and AV2 will be transmitted to the
speakers at the same time.
Stereo sound application:
1. Input: Connect only one set of AV audio cables to R-IN and L-IN.
2. Output: Connect from R-OUT and L-OUT to the input of the AV
equipment.
C. S-video input:
1. Connect the S-video (4-pin DIN) connector (labeled "S") from the AV
equipment to the monitor.
2. Connect the red (R) and white (L) audio jacks from the AV equipment to
the monitor.
D. PC Audio line input
E. DVI connector
1715 Monitor UG_EN.doc
06.2004