Te (Text Enhancement); Elc (Enhance Light Colors); Setting Defaults - HP 210/210LX User Manual

Setting Defaults

Setting Defaults Setting Defaults Setting Defaults Setting Defaults
3-8 Copying 3-8 3-8
3-8 3-8

TE (Text Enhancement)

The TE (Text Enhancement) setting sharpens the edges of black text. It
should be turned on in most situations. Turn off TE if
stray dots of color surround some text
large, black typefaces have a splotchy (not smooth) appearance
thin, colored objects or lines contain black spots
1 1 1 1 1
With TE displayed on the front panel display, use the Plus (+) and Minus (–)
buttons to cycle between o (off ) and
2 2 2 2 2
To confirm your selection, press Select/Resume.

ELC (Enhance Light Colors)

Use ELC (Enhance Light Colors) to copy very pale colors. Turn on ELC if
very pale colors are printing as white.
1 1 1 1 1
With ELC displayed on the front panel display, use the Plus (+) and Minus
(–) buttons to cycle between o (off) and
2 2 2 2 2
To confirm your selection, press Select/Resume.
If you consistently use a setting on the front panel other than the default,
you can establish that setting as the default.
NOTE NOTE
NOTE NOTE NOTE The default setting is always indicated by a black dot ( ).
For example, to set Reduce/Enlarge to Auto Fit, follow these steps:
1 1 1 1 1
Press the Reduce/Enlarge button until Auto Fit is displayed, and then press
Select/Resume.
2 2 2 2 2
Press the Menu button until Set Defaults is displayed.
3 3 3 3 3
Press Select/Resume. Current settings saved as defaults is displayed.
(on).
(on).