Bathroom Installation - Dimplex V1525BT Owner's Manual

Fireplace Installation
completed prior to installing the
unit into the wall.
12. Place unit in position in the
opening, push straight in and
attach unit to studs using No.
10 fasteners. Attach supplied
wall cover brackets to the top
and the bottom of fireplace to
cover the gap on the dry wall
(Figure 8)
13. Attach fireplace frame as
shown in figure 4.
WIRING
3-POSITION
SWITCH
L
GROUND
N
INTEGRAL
ON-OFF R/C
CUTOUT

Bathroom Installation

This firebox must be protected
by a GFI receptacle or circuit for
bathroom use. If receptacle is
used it must be readily acces-
sible.
This unit is an electrical appliance
that is not watertight and must
be installed as to prevent water
from entering the unit to prevent
electrical shock. This unit must
be installed away from showers,
tubs, etc.
Never locate fireplace where it
may fall into a bathtub or other
water containers. Keep towels
and other combustible materials
3 ft (0.9 m) away from the front of
the unit.
HEAT
SWITCH
FLICKER
M
MOTOR
LOWER
LIGHTS
THERMOSTAT
M
ELEMENTS
BLOWER
MOTOR
13