Chicago Electric 94337 Assembly And Operating Instructions Manual
Auto-darkening welding helmet with ansi-approved lens
Hide thumbs
Also See for 94337:
- Assembly and operating instructions manual (8 pages) ,
- Set up and operating instructions manual (11 pages) ,
- Set up and operating instructions manual (11 pages)
Table of Contents
Advertisement
Quick Links
AUTO-DARKENING WELDING HELMET
with ANSI-Approved Lens
Models
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE: YOUR Helmet may appear different from the Helmet pictured in this manual.
Aside from the slight differences noted in this manual, the warnings, operation
instructions, and maintenance procedures will remain the same.
Visit our Web site at http://www.harborfreight.com
Copyright
or any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
91212, 91214, 94336, 94337
Distributed exclusively by Harbor Freight Tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
TO PREVENT SERIOUS INjURY OR BLINDNESS,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
2006 by Harbor Freight Tools
©
Manual revised 06h
. All rights reserved. No portion of this manual
®
.
®
Advertisement
Table of Contents
Related Manuals for Chicago Electric 94337
Summary of Contents for Chicago Electric 94337
- Page 1 AUTO-DARKENING WELDING HELMET with ANSI-Approved Lens Models 91212, 91214, 94336, 94337 ASSEMBLY AND OPERATING INSTRUCTIONS NOTE: YOUR Helmet may appear different from the Helmet pictured in this manual. Aside from the slight differences noted in this manual, the warnings, operation instructions, and maintenance procedures will remain the same.
-
Page 2: Specifications
Specifications Model 91212 91214 94336 94337 Shell Designs Blue Flames Eagle Skull Solar Cells Solar Cells Power Source (rechargeable battery included, (rechargeable battery included, no additional battery required) battery lifetime 4,000 hours) Viewing Area 3.86” x 1.73” 3.74” x 2.44”... - Page 3 handle machines, tools, or extension cords. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool.
- Page 4 17. Use only at temperatures within the operating range for your model as stated on the specifications chart on page 2. Inhalation Hazard Welding Produces TOxIC FUMES and GASSES. Exposure to welding gasses can increase the risk of developing certain cancers, such as cancer of the larynx and lung cancer.
-
Page 5: Before First Use
Before First Use The Auto-Darkening Welding Helmet needs to be charged prior to use and after extended storage. Leave the solar panel on the helmet facing the sun for at least 4 hours before first use. Remove the protective film from both sides of the front lens (if not already done). Follow the Before Each Use instructions below. - Page 6 UV and IR radiation during the entire welding process, even in the clear state. The UV/IR protection level is up to Shade 16 (DIN) at all times. Models 94336 & 94337 (View from inside of helmet.)
-
Page 7: Troubleshooting
TROUBLESHOOTING Irregular Darkening or Dimming a. Headband has been set unevenly on the two sides of the helmet (unequal distances from the eyes to the filter’s lens). b. Reset headband to reduce the difference in distances to filter, if necessary. Auto-Darkening Filter Does Not Darken Or Flickers a. - Page 8 MAINTENANCE CONTINUED REPLACING THE LENS COVER FOR SKU 94337 AND 94336. Replace the Front Lens Cover (2) if it is damaged (cracked, scratched, soiled or pitted). Refer to the illustration below. a. To remove the Front Lens Cover (2) you must first remove the frame (1). Inside the helmet on the cartridge there are 4 tabs, (two on the top and two on the bottom).
-
Page 9: Parts List And Assembly Diagram
Parts List and Assembly Diagram IMPORTANT: Parts are not necessarily interchangeable. When ordering parts, make certain to specify which model they are for. Part Description Q’ty Part Description Q’ty Block Nut Frame (sku 94336 & 94667 only) Washer Front Lens Cover Adjustable Limitation Washer Auto-Darkening Filter Cartridge* Left Limitation Washer...