Mackie Thump 12 Owner's Manual page 7

Hookup Diagrams continued...
To next
Thump
loudspeaker
input
To next
Thump
loudspeaker
input
Thump loudspeakers may be daisy-chained via the male XLR connector labeled "THRU". Simply plug
the signal source (i.e., mixer output or microphone) into the input jack(s), and patch that loudspeaker's
thru jack to the next loudspeaker's input jack, and so on, daisy-chaining multiple Thump loudspeakers.
See above for visual representations of daisy-chaining.
Daisy-Chaining Multiple Thump Loudspeakers
Main
Outs
1402VLZ4 Mixer
To next
Thump
loudspeaker
input
Owner's Manual
7