Pfaff quilt ambition 2.0 Owner's Manual page 8

Presser feet
Important: Make sure that the IDT
the Open Toe Free-Motion Foot.
8
Standard presser foot 0A with IDT
delivery)
This foot is used mainly for straight stitching and zigzag stitching with a stitch
length longer than 1.0 mm.
Fancy stitch foot 1A with IDT
This foot is used for decorative stitches. The groove on the underside of the foot
Fancy stitch foot 2A
When sewing decorative stitches or short zigzag stitches and other utility
stitches with less than 1.0mm stitch length, use this foot. The groove on the
Blindhem foot 3 with IDT
This foot is used for blindhem stitches. The toe on the foot guides the fabric. The
red guide on the foot is designed to ride along the fold of the hem edge.
Zipper foot 4 with IDT
™
This foot can be snapped on either the right or the left of the needle, making it
easy to sew close to both sides of the zipper teeth. Move the needle position to
the right or left to sew closer to zipper teeth.
One step Buttonhole foot 5B
This foot has a space in the back to set the size of the buttonhole. The machine
1/4" quilting foot with IDT
This foot is perfect for piecing and patchwork, especially when used in
conjunction with the straight stitch needle plate (optional accessory #820 999-
096). The clearance between the needle and the outer edge of the toe is 1/4" (6.3
mm) and between the needle and the inner edge of the toe is 1/8" (3.15 mm).
Open Toe Free-Motion Foot
This foot is used for stippling and free-motion embroidery. It has an extra-large
opening cut out in the front to give you an optimal view of your free-motion
sewing and quilting. The open front and transparency of the foot with both
vertical and horizontal markings, allow you to easily do free-motion stippling or
follow a design on the fabric.
system is disengaged when using presser foot 2A, 5B and
™
™ system (attached on the machine upon
system
™
system
™
system
system
™