Interference Prevention Fi Lter (Exclusively For Thru-Beam Type Sensor Nx5-M10R□) - Panasonic NX-5 series User Manual

9-2 Interference prevention fi lter
(exclusively for thru-beam type sensor NX5-M10R□)
● By mounting interference prevention fi lters PF-NX5-□, two sets of NX5-M10R□ can be
mounted close together.
However, the sensing range is reduced when the interference prevention is mounted.
● The fi lters can be mounted by the same method as for the slit masks.
● There are two types of interference prevention fi lters. The two sets of thru-beam type
sensors should be fi tted with different types of interference prevention fi lters.
● The interference prevention does not work even if the fi lters are mounted for emitters
only, receivers only or the same model No. of the interference prevention filters are
mounted on both the sets of the sensor.
Model No.
PF-NX5-V
PF-NX5-H
Note: The model No. is not shown on the interference prevention fi lters. Take care when mounting them on the
sensors.
Fitted with
PF-NX5-H
Direction of
Color of the bracket
thru-beam axis
Vertical
Horizontal
Fitted with
PF-NX5-V
Sensing distance
Silver
Light brown
Min. sensing object
5m ø20mm
5m ø20mm
17