HP L1810 User Manual page 18

Manual Selection
To manually select an input channel, use the video input button. This
is located beneath the front panel of the monitor next to the Video
Input LED's.
If you want to receive a signal from a computer connected to
(DVI) select the following.
If you want to receive a signal from a computer connected to
(VGA) select the following:
If two operational computers are connected, the monitor is only able
to detect input from the computer connected to the connector
selected.
To return to auto selection at any time select AUTO connectors 1
NOTE
(DVI) and 2 (VGA).
Selecting Input Priority
When your monitor is connected to two computers, you will need to
give priority to one computer. This computer is selected every time
you switch on your monitor and when using auto selection (see "Auto
Selection" on page 16). To choose which computer has priority:
Select 1 : 2 from the main menu, then press
PRIORITY submenu.
Select INPUT 1 or INPUT 2 using the adjustment control, then press
to save your selection and return to the OSD main menu.
HP 18.1 LCD" Color Monitor User's Guide
1 AUTO 2
1 AUTO 2
USING Your Monitor
to enter the INPUT
English 17