Using The Auto-Adjustment Function - HP FP9419 User Manual

Downloading from the World Wide Web
To download the latest version of .INF and .ICM files from the
HP Monitors Support Web site:
1. Refer to:
Select your country/region.
2. Follow the links for your monitor to the support page and
download page.
3. Ensure your system meets the requirements.
4. Download the software by following the instructions.

Using the Auto-Adjustment Function

You can easily optimize the screen performance for the VGA input
by using the Select/Auto button and the auto-adjustment pattern
software on the CD provided.
Do not use this procedure if your monitor is using a DVI input. If
your monitor is using an analog (VGA) input, this procedure can
correct the following image quality conditions:
■ Fuzzy or unclear focus
■ Ghosting, streaking or shadowing effects
■ Faint vertical bars
■ Thin horizontal scrolling lines
■ Picture off-center
To use the Adjustment pattern with your flat panel monitor:
1. Press the Select/Auto button under the monitor's front panel.
❏ You can also press the Menu button, then select Auto
❏ If the result is not satisfactory, continue with the procedure.
User's Guide
http://www.hp.com/support
Adjustment from the OSD Main Menu. See the
"Adjusting Monitor Settings" section.
Operating the Monitor
4–3