Wire Connections - Alto PASSIVE Owner's Manual

HOOK HOOK

5. WIRE CONNECTIONS

4. WIRE CONNECTIONS
UP UP
-.For Passive Speaker Cabinets
Please only use the power connectors to make connections with other signal source
equipment for the passive speaker cabinets. The power connector has four terminals:
1+, 1-, 2+, 2-.
In our cabinets, only 1+/1- are used to connect the Speaker+/Speaker-, and 2+/2-
are not used.
-. For LTO MS1 SPEAKER MODELLER
Please use shielded twisting pair which can reduce noise and signal loss. The
wiring of the connector is as follow:
Tip
Ring
Sleeve
TRS Type balanced
1+
2+
+
-
7