Playing A Dvd Video - Sony Playstation 2 PS2 Instruction Manual

14

Playing a DVD video

Playing a DVD video
Depending on the DVD video, some operations
may be different or restricted. Refer to the
instructions supplied with your disc.
1
Turn on the console using the
main power switch on the
console rear.
The 1 (standby) indicator on the
console front lights up in red to
indicate that the console is now in
standby mode.
2
Press the 1 (standby) /reset
button.
The 1 indicator turns green and the
start-up screen is displayed.
3
Press the A (open) button.
The disc tray opens.
4
Place a disc on the disc tray with
the label side facing up (data
side down).
5
Press the A button.
The disc tray closes and DVD content
is displayed on the screen.
Notes
• The PlayStation 2 console is equipped with advanced
®
playback features that can optimize audio/video
quality. For details on adjusting settings to enable these
advanced features, see pages 20-25.
• If you press the A button during or after playback, the
Browser screen appears.
• When playing a DVD video, do not connect the console
to a VCR. If you do, picture quality may be reduced.
Connect the console directly to the TV.
Ending DVD video playback
When you have finished viewing a DVD,
follow the steps below to save DVD player
settings, return to the Browser screen or put the
console in standby mode.
1
Press the A (open) button.
The disc tray opens and the Browser
screen is displayed.
2
Remove the disc.
3
Press the A button to close the
disc tray.
4
Press and hold down the 1/reset
button for more than three
seconds.
The 1 indicator turns red and the
console enters standby mode.
Note
To save changes to DVD player settings you must eject the
DVD before pressing the 1 (standby)/reset button or
turning off the console using the main power switch on
the console rear.
If you experience problems playing a DVD video:
In rare instances, certain DVD videos may not operate
properly with PlayStation 2. This is primarily due to
®
variations in the manufacturing process or software
encoding of the DVD video software. If you experience
problems, try restarting your DVD video. If problems
persist, for more information call the PlayStation service
®
line number listed on your warranty card for technical
assistance.
Operating the DVD player
There are three ways to operate the DVD
player:
• You can operate the DVD player directly
using the analog controller (DUALSHOCK
as explained below.
• You can operate the DVD player through the
on-screen Control Panel. The Control Panel
allows access to additional DVD player
options and settings. For details, see "Using
the Control Panel" on page 15.
1
2
3
4
5
1 L2 button ( Fast Reverse Search)
Fast reverses playback on the screen to aid
in looking for a particular scene.
2 L1 button (. Previous)
Returns to the beginning of the current or
previous chapter.
3 Up, down, right, and left directional buttons
Used to select items displayed on the screen.
*
4 L3 button ( Subtitle Options)
Displays and changes DVD subtitle options.
5 SELECT button
Displays the Control Panel.
6 R2 button ( Fast Forward Search)
Fast forwards playback on the screen to aid
in looking for a particular scene.
7 R1 button (> Next)
Skips to the beginning of the next chapter.
•You can also operate the DVD player using
the DVD remote control (for PlayStation
which is sold separately.
Using the analog controller (DUALSHOCK
The function of each button on the analog
2)
®
controller (DUALSHOCK 2) is explained
®
below.
Note
The direct button functions of the analog controller
(DUALSHOCK 2) cannot be used when the Control Panel
®
is displayed.
6
7
8
9
q;
qa
qs
qd
8 f button ( Menu)
Displays the disc menu of DVD-Video
discs. The content of the menu varies from
disc to disc.
9 a button (x Stop)
Stops playback.
0 ✕ button (Enter)
Enters the item selected on the screen.
qa s button ( Top Menu)
Displays the disc menu of DVD-Video
discs. The content of the menu varies from
disc to disc.
qs R3 button (Audio Options) *
Displays and changes DVD audio options.
qd START button (N Play/X Pause)
Starts playback/Pauses and resumes
playback.
* When using a controller without the L3 or R3 buttons,
use the Control Panel to select among available subtitle
and audio options.
2),
®
2)
®