Dsl Specifications - Cisco 881 Datasheet

Table 12.
SRST Specifications
SRST specifications
Wireless Specifications
Radio frequency band
Data rates supported
Maximum transmit power (2-channel
aggregate)
3G specifications
Data rates

DSL Specifications

Tables 13 through 21 list the DSL features specifications and DSL access multiplexer (DSLAM) interoperability
support for the Cisco 880 Series Routers. For more information and details about DSLAM and line-card
interoperability, please refer to the following document:
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Wireless LAN and 3G Specifications
FXS voice-port specifications:
BRI voice-port specifications:
Note: Maximum power setting is subject to changes by channel and by region, depending on
regulations.
● Packet fax and voice DSP module PVDM2-16
● Tip and ring interfaces for each FXS port (subscriber line interface card [SLIC])
● Ring voltage
● Ring frequency
● Ring waveform
● Ring load
● Ringer Equivalence Number (REN)
● Loop resistance
● On- and off-hook characteristics
● On-hook voltage (tip and ring)
● Off-hook current
● RJ-11 FXS port terminating impedance option
● Interface type
● Compliance
● Safety conformance
● ITU compliance
● Interface
● ISDN digital access
● Physical connector
● Phantom power
● 2.4 GHz
● 802.11b: 1, 2, 5.5, 6, 9, and 11 Mbps
● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
● 802.11n: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, and m0-m15
● 802.11b 20 dBm
● 802.11g 17 dBm
● 802.11n 16 dBm
● CDMA: 850 and 1900 MHz
● HSDPA: 850, 900, 1900, and 2100 MHz
What Is Cisco ISR and ISR G2 xDSL Interoperability?
Page 16 of 23