Cisco 881 Datasheet page 14

Feature
Default and maximum flash memory
WAN
LAN switch
Standard 802.11g/n access point based
on IEEE 802.11n draft 2.0 standard
Console or auxiliary port
One USB 1.1 port for advanced
security features such as security
tokens or USB flash memory
ISDN BRI S/T
3G express card modem
External power supply
Physical dimensions and weight
Power
Approvals and compliance
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Description
● 1024 MB on Cisco 880 Series WLAN
● 128 MB on Cisco 880 Series data, embedded 3G WWAN, and Cisco Unified Border Element
models
● 256 MB on Cisco 880 Series Voice and SRST models
● Fast Ethernet
● Multimode VDSL2 and ADSl2/2+ over ISDN with ISDN backup
● Multimode VDSL2 and ADSl2/2+ over basic telephone service
● ADSL2/2+ over ISDN with ISDN backup
● ADSL2/2+ over basic telephone service with ISDN backup
● VDSL2 over basic telephone service with ISDN backup
● Multimode G.SHDSL (2- and 4-wire support) with ISDN backup
● Fast Ethernet and 3G WAN for Code Division Multiple Access (CDMA) and high-speed downlink
packet access (HSDPA)
Managed 4-port 10/100BASE-T with autosensing MDI/MDX for auto crossover
Optional on all models
RJ-45
● One USB 1.1 port on Cisco 880 Series Routers
● USB devices supported:
USB eTokens
◦
USB flash memory
◦
Note: The USB 1.1 port cannot be used for connecting external devices other than those specified at:
http://www.cisco.com/en/US/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.ht
ml.
Available on:
● Cisco 886, 886VA, 887, 887V, 888, and 888EA for out-of-band management and dial backup or
primary
Available on:
● Cisco 881G, 886G, 887G, 887VG, and 888G for out-of-band management and backup or primary
● Cisco 888G for out-of-band management and backup or primary
Note: Cisco 887VG currently ships with HSPA modem only.
Universal 100 to 240 VAC input; 60W, 12 VDC output
Product dimensions, nonwireless models (H x W x D):
● 1.9 x 12.8 x 9.8 in. (48 x 325 x 249 mm) (includes rubber feet)
● 1.75 x 12.8 x 9.8 in. (44 x 325 x 249 mm) (without rubber feet)
Product dimensions, wireless models (H x W x D):
● 1.9 x 12.8 x 10.4 in. (48 x 325 x 264 mm) (includes rubber feet)
● 1.75 x 12.8 x 10.4 in. (44 x 325 x 264 mm) (without rubber feet; excludes antennas)
● Weight: 5.5 lb (2.5 kg) maximum
Product power specifications:
● AC input voltage: 100 to 240 VAC
● Frequency: 50 to 60 Hz
● Maximum output power: 60W
● Output voltages: 12 VDC
Optional internal PoE with external adapter:
● Maximum output power: 80W
● External output voltage: 48 VDC
Emissions:
● 47 CFR Part 15: 2006
● CISPR22: 2005
● EN300386: V1.3.3: 2005
● EN55022: 2006
● EN61000-3-2: 2000 [Inc amd 1 and 2]
● EN61000-3-3: 1995 [+ amd 1: 2001]
Page 14 of 23