Starting The Engine - McCulloch M46 Owner's Manual

Failure to follow instructions can result in serious personal injury. Spend a few moments to
familiarize yourself with your mower before each use.
Model No. M46
9096-305209
Ensure that the engine has been prepared correctly and that the fuel tap is turned ON. We
recommend that you check the oil level before every mowing session.
Ensure that the engine has been prepared correctly and that the fuel tap is turned ON.
Never run the engine indoors or in poorly ventilated areas. engine exhaust
We recommend that you check the oil level before every mowing session.
contains carbon monoxide, an odourless and deadly gas. keep hands, feet,
hair and loose clothing away from moving parts.
Never run the engine indoors or in poorly ventilated areas. engine exhaust
COLD STARTING
contains carbon monoxide, an odourless and deadly gas. keep hands, feet,
1. Set the engine control to the CHOKE position.
hair and loose clothing away from moving parts.
2. Turn the fuel tap to the "ON" position. (Fig. 6)
3. Stand to the right of the mower. Hold the top handle firmly with your left hand to hold
COLD STARTING
mower stationary. Grasp the starter rope handle and pull slowly until resistance is felt.
Then pull briskly.
1. Set the engine control to the CHOKE position.
Do not pull the starter rope with a jerk or release it until fully rewound.
2. Turn the fuel tap to the "ON" position. (Fig. 6)
4. When engine has warmed up for a short time move the engine control lever to the desired
3. Stand to the right of the mower. Hold the top handle firmly with your left hand to hold
speed position for cutting.
mower stationary. Grasp the starter rope handle and pull slowly until resistance is felt.
Then pull briskly.
Do not pull the starter rope with a jerk or release it until fully rewound.
4. When engine has warmed up for a short time move the engine control lever to the desired
speed position for cutting.
Fuel
tap

STARTING THE ENGINE

STARTING THE ENGINE
WARNING
WARNING
Fig. 6
11
11
AU
AU