Advanced Network Setup - Toshiba 55VL900A Owner's Manual

Wireless Information
The settings confi gured in Wireless Setup can be
confi rmed.
a
Press QUICK to open the Quick Menu.
b
Press B or b to select Wireless Information
and press OK.
Quick Menu
Picture Size
3D Settings
More Information
Channel Options
Sleep Timer
Speakers
Headphone Level
Wireless Information
c
When the Network Type is Wireless, a
Wireless Information window will appear.
NOTE: Press the RED button to scan for all
APs.
Item
Status Connected is displayed when the
TV is connected with the AP.
Disconnected is displayed when
the TV is not connected with the AP.
Signal Connection signal strength with
AP (STRONG/MEDIUM/WEAK)
Speed Link with AP
Mode Working mode (11a, 11b, 11g, 11n)
Network Name SSID set
Authentication Authentication set
Encryption Encryption set
Security Key Security Key set
AP MAC The AP's MAC address is displayed
Address when the TV is connected with the AP.
TV MAC The MAC address of the USB (Dual
Address Band WLAN Adaptor) is displayed.
DHCP Enabled is displayed when using
DHCP.
Disabled is displayed when not
using DHCP.
IP Address The TV's IP address
Subnet Mask Value of the Subnet Mask
Default Address of the Default GATEWAY
Gateway
DNS Address of the DNS
Super Live
00:00
TV Speakers
50
Description
NOTE: Even if an AP for IEEE 802.11n is used when
Encryption is set to WEP or TKIP, the Speed value
might be low. It is recommended that Encryption
be changed to AES (see "Manual Setup" on page
38).
Notes on wireless LAN environment:
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or
IEEE 802.11n on 5GHz for audio and SD video
streaming.
• It is recommended to use IEEE 802.11n on 5GHz
for HD video streaming.
• It is recommended that the encoding rate for
streaming video content is 20Mbps or less.
• It is not recommended to use 2.4GHz for audio
and video streaming.
• Content playback may be interrupted by various
surrounding interference.

Advanced Network Setup

NOTE:
• When the DHCP function of the router connected
with this TV is On, you can set Auto Setup to On
or Off . (This should usually be set to On.)
• When the DHCP function of the router is Off ,
set Auto Setup to Off , and set the IP Address
manually.
IP Address Setup
Auto Setup:
a
In the Preferences menu, press B or b to
select Network Setup and press OK.
b
Press B or b to select Advanced Network
Setup and press OK.
Network Setup
Network Type
Wireless Setup
Advanced Network Setup
c
Press B or b to select IP Address Setup and
press OK.
Advanced Network Setup
IP Address Setup
DNS Setup
MAC Address
39
CONTROLS AND FEATURES
Wired