Hold Function - Sharp MD-MT99H Operation Manual

Hold Function

The present operation condition can be kept even if other buttons are accidentally pressed in a place such as a
crowded train.
If the battery is inserted or the AC adaptor is connected,
you can set this function even when the power is turned
off.
To cancel the hold mode
Press and hold down the HOLD button for 2 seconds or
more whilst the unit is in the hold mode.
"HOLD OFF" will be shown.
34
Web-site: www.sharp.co.uk/support
To cancel the hold mode
Move the HOLD switch away from the safety position (the
opposite direction of the arrow).
If the hold function is active whilst the power is turned
off, the power cannot be turned on by mistake and the
battery will not be drained.
Help Line: 08705 274277 (office hours)
01/4/4 99UK_4.fm