Assembly - NordicTrack NTEX14807.1 User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench
screwdriver
Use the part drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing is the key number of the part, from the PART LIST near the end of this manual. The number fol-
lowing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preat-
tached. If a part is not in the hardware kit, check to see if it has been preattached.
M8 Nylon
Locknut (99)–4
M4 x 12mm
Screw (101)–2
M6 x 16mm
Screw (71)–4
M10 Curved
Washer (94)–4
.
M10 Nylon
Locknut (91)–4
M4 x 16mm
M4 x 16mm Round Head
Screw (77)–1 Screw (68)–4
M6 x 32mm Button
Screw (69)–4
M8 x 35mm Button
Bolt (72)–2
M10 x 94mm Button Bolt (65)–4
M8 Split M6 Washer
Washer (93)–6
(88)–8
M4 x 19mm
Screw (75)–2
M6 x 38mm Button
Screw (25)–4
5
and Phillips
M8 Curved
Washer (86)–2
M4 x 38mm
Screw (89)–2
M8 x 18mm Button
Screw (67)–4
M8 x 68mm Button
Bolt (70)–2