Chapter-2; Hardware Installation; Connections - D-Link GLB-802C User Manual

CHAPTER-2

HARDWARE INSTALLATION

2.1 CONNECTIONS

Connect the GLB-802C Router to the computer as shown in the image given below.
Connect the adapter supplied with the router. The power LED will turn ON to indicate proper
operation
SPLITTER CONNECTION
Connect the "LINE" port of the splitter to wall jack (telephone line coming from the service provider)
using the telephone cable.
Use the other telephone cable to connect "MODEM" port of the splitter to the "LINE" port of the
router. ADSL LED will glow when ADSL connection is established with the ISP.
The "PHONE" port of the splitter can be used to connect the telephone to the splitter using a
telephone cable
.
Note: If user plans to distribute the telephone line (parallel connections) in multiple rooms/connections, please
ensure that the splitter is installed on the main telephone line coming from service provider. User can then
distribute the PHONE Line through the PHONE port and connect the ADSL MODEM/ROUTER to the
MODEM port.
PC CONNECTION
Use LAN cable to connect "Ethernet" port of the router and "LAN" port of the computer.
To connect using the USB port, first install the USB drivers provided along with the CD and connect
the USB cable to the USB port of router to the PC. The USB LED will glow as soon as the USB
cable is connected.
D-Link GLB-802C ADSL2+ Router User Manual
CHAPTER-2
4