Sanyo TLS-224P Instruction Manual page 19

PROGRAMME TIMER RECORDING
Setting the Holidays
By setting the holidays, timer recording will be
conducted on those days, as set for Sundays.
1
Press the AUDIO ON/MENU button until the
(HOLIDAY SET) menu is displayed.
<HOLIDAY SET>
1 -----
2 -----
3 -----
4 -----
5 -----
6 -----
7 -----
8 -----
9 -----
10 -----
2
Press the l (or j) button to set the day of the
holiday, then press the « button.
3
Press the l (or j) button to set the month of the
holiday.
4
Press the « (or ]) button, the next line to set starts
flashing.
Repeat steps 2 to 4 to set up to 20 holidays.
°
5
Press the PAUSE/SCAN button, the normal screen
is displayed.
° The setting procedure is now completed.
NOTE:
•
If setting holidays, be sure that a timer recording is
set for Sunday. If not, this function will not operate.
11 -----
12 -----
13 -----
14 -----
15 -----
16 -----
17 -----
18 -----
19 -----
20 -----
Month
Day
Changing a Programme Timer
Recording
1
Press the AUDIO ON/MENU button until the
(TIMER SET) menu is display.
2
Press the « (or ]) button, until the setting to
correct is flashing.
3
Press the l (or j) button, to correct the setting.
4
Press the PAUSE/SCAN button, the normal screen
is displayed.
5
Press the TIMER button.
To Cancel a Programme Timer
Recording
1
Press the AUDIO ON/MENU button until the
(TIMER SET) menu is displayed.
2
Press the « (or ]) button, until the "Y"
corresponding to the timer recording to cancel is
flashing.
3
Press the l (or j) button, to select "N".
4
Press the PAUSE/SCAN button, the normal screen
is displayed.
5
Press the TIMER button.
To Cancel all Programme Timer
Recordings
1
Press the AUDIO ON/MENU button until the
(TIMER SET) menu is displayed.
2
Press the MENU RESET button.
° All programmed timer recordings are erased.
3
Press the PAUSE/SCAN button, the normal screen
is displayed.
18
GB
English