HP 2000sa Quickspecs page 17

QuickSpecs
Configuration Information
Step 2 - Choose Supported Options For SAS HBA Step 2 - Choose Supported Options For SAS HBA Step 2 - Choose Supported Options For SAS HBA Step 2 - Choose Supported Options For SAS HBA
Select each required option with quantities specified.
SAS HBA SAS HBA SAS HBA SAS HBA
HP SC08Ge HBA
Step 2b - SAS Cables (as needed for connecting MSA2000sa to an HBA) Step 2b - SAS Cables (as needed for connecting MSA2000sa to an HBA)
Step 2b - SAS Cables (as needed for connecting MSA2000sa to an HBA) Step 2b - SAS Cables (as needed for connecting MSA2000sa to an HBA)
Model Description Model Description Model Description Model Description
mini-SAS 4x 1M Cable All
mini-SAS 4x 2M Cable All
mini-SAS 4x 4M Cable All
Step 3 - Options Step 3 - Options Step 3 - Options Step 3 - Options
The base controller chassis with one or two controllers has twelve drive bays for both SAS and/or SATA drives. For additional twelve
additional drive bays purchase an MSA2000 3.5" Disk Enclosure. You may attach a total of three Drive Enclosures for a total of
forty-eight drive bays. Single controller arrays support Single I/O Disk Enclosures; dual controller arrays support Dual I/O Disk
Enclosures.
Step 3a - MSA2 SAS and SATA Drive Options Step 3a - MSA2 SAS and SATA Drive Options Step 3a - MSA2 SAS and SATA Drive Options Step 3a - MSA2 SAS and SATA Drive Options
NOTE: MSA2000 3.5 inch drives are for use only with MSA2000 products. NOTE:
NOTE: NOTE:
HP StorageWorks MSA2 146GB 3G 15K 3.5 inch SAS DP HDD
HP StorageWorks MSA2 300GB 3G 15K 3.5 inch SAS DP HDD
HP StorageWorks MSA2 500GB 7.2K 3.5 inch SATA HDD
HP StorageWorks MSA2 750GB 7.2K 3.5 inch SATA HDD
HP StorageWorks MSA2 1TB 7.2K 3.5 inch SATA HDD
Step 3b - Drive Enclosure Options Step 3b - Drive Enclosure Options Step 3b - Drive Enclosure Options Step 3b - Drive Enclosure Options
The array itself has twelve drive bays. Should you require a drive enclosure, the model you choose depends to which array model it
will be attached. If it is a single controller array, then choose the JBOD designated as "Single I/O". If it is attaching to a dual
controller array then choose the "Dual I/O" JBOD
HP StorageWorks MSA2000 Single I/O 3.5 in 12 Drive Enclosure (w/ two .6m SAS cables)
HP StorageWorks MSA2000 Dual I/O 3.5 inch 12 Drive Enclosure (w/ two .6m SAS cables)
SAS Cables (as needed for additional Drive Enclosures where standard .6m not sufficient length) SAS Cables (as needed for additional Drive Enclosures where standard .6m not sufficient length) SAS Cables (as needed for additional Drive Enclosures where standard .6m not sufficient length) SAS Cables (as needed for additional Drive Enclosures where standard .6m not sufficient length)
HP Ext SAS 1m Cable
HP Ext SAS 2m Cable
HP Ext SAS 4m Cable
Description with Parts Shipped: Description with Parts Shipped: Description with Parts Shipped: Description with Parts Shipped:
SAS HBA to connect to a host
DA - 13045 Worldwide — Version 1 — July 14, 2008
HP StorageWorks 2000sa Modular Smart Array HP StorageWorks 2000sa Modular Smart Array HP StorageWorks 2000sa Modular Smart Array HP StorageWorks 2000sa Modular Smart Array
Part Number Part Number Part Number Part Number
488765-B21
Part Number Part Number Part Number Part Number
407337-B21
407339-B21
432238-B21
AJ735A
AJ736A
AJ738A
AJ739A
AJ740A
AJ749A
AJ750A
389665-B21
389668-B21
389671-B21
Page 17