Card Reader Specifications - Dell 2707WFP User Manual

This monitor supports High-Speed Certified USB 2.0 interface.
USB Upstream Connector
Pin Number 4-pin Side of the Connector
1 DMU
2 VCC
3 DPU
4 GND
USB Downstream Connector
Pin Number 4-Pin Side of the Signal Cable
1 VCC
2 DMD
3 DPD
4 GND
USB Ports
1 upstream - rear
l
4 downstream - 2 on rear; 2 on left side
l
NOTE: USB 2.0 capability requires 2.0 capable computer
NOTE: The monitor's USB interface works only when the monitor is on or in power save mode, If you switch the monitor off and then on,
attached peripherals may take a few seconds to resume normal functionality.
Card Reader Specifications
Overview
The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.
l
Data Rate Power Consumption
High speed 480 Mbps 2.5W (Max., each port)
Full speed 12 Mbps 2.5W (Max., each port)
Low speed 1.5 Mbps 2.5W (Max., each port)