Card Reader Specifications; Usb Ports - Dell 2407WFP-HC User Manual

Pin Number 4-pin Side of the connector
1 DMU
2 VCC
3
DPU
4 GND
USB Downstream Connector
Pin Number 4-Pin Side of the Signal Cable
1 VCC
2
DMD
3 DPD
4 GND

USB Ports

1 upstream - rear
l
4 downstream - 2 on rear; 2 on left side
l
NOTE: USB 2.0 capability requires 2.0 capable computer
NOTE: The monitor's USB interface works only when the monitor is on or in power save mode, If you switch the monitor off and then on,
attached peripherals may take a few seconds to resume normal functionality.
Card Reader Specifications
Overview
The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.
l
The Flash Memory Card Reader is automatically recognized by Windows® 2000, XP and Vista.
l
Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.
l
All standard file operations (copy, delete, drag-and-drop, etc.) can be performed with this drive.
l
Features
The Flash Memory Card Reader has the following features:
Supports Windows 2000, XP and Vista operating systems
l
No Windows 9X support from Dell
l
Mass Storage Class device (No drivers are required under Windows 2000, XP and Vista)
l
USB-IF certification
l
Supports various memory card media
l