Monitor Specifications; Power Management Modes; Pin Assignments - Dell 1907FPV User Manual

About Your Monitor: Dell™ 1907FPV Flat Panel Monitor User's Guide
Left side

Monitor Specifications

Power Management Modes

If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is
referred to as 'Power Save Mode'*. If input from keyboard, mouse, or other input devices is detected by the computer, the monitor automatically 'wakes up'. The following
table shows the power consumption and signaling of this automatic power saving feature:
VESA Modes
Normal operation (with Dell Soundbar and USB active)
Normal operation
Active-off mode
Switch off
NOTE: The OSD will only function in the 'normal operation' mode. One of the following messages will appear when the "menu" or "plus" buttons are pressed when in
Active-off mode.
or Any Key on Keyboard or Move Mouse
This monitor is ENERGY STAR®-compliant as well as TCO '99 / TCO '03 power management compatible.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Pin Assignments

15-pin D-Sub connector
file:///T|/htdocs/monitors/1907FPV/en/about.htm[8/7/2012 10:06:38 AM]
USB connectors (downstream)
Horizontal Sync Vertical Sync Video
Active
Active
Inactive
-
1. Analog Input
In Power Save Mode
Press Computer Power Button
Activate the computer and 'wake up' the monitor to gain access to the OSD.
Right side
Power Indicator
Active Active Green
Active Active Green
Inactive Blanked Amber
- - Off
In Power Save Mode
or
Press Computer Power Button
or Any Key on Keyboard or Move Mouse
Power Consumption
65 W (maximum)
32 W (typical)
Less than 2 W
Less than 1 W
2. Digital Input