Summary Of Function Plot Operation - HP 50g User Manual

Summary of FUNCTION plot operation

In this section we present information regarding the PLOT SETUP, PLOT-
FUNCTION, and PLOT WINDOW screens accessible through the left-shift key
combined with the soft-menu keys A through D. Based on the graphing
examples presented above, the procedure to follow to produce a FUNCTION
plot (i.e., one that plots one or more functions of the form Y = F(X)), is the
following:
„ô, simultaneously if in RPN mode: Access to the PLOT SETUP window.
If needed, change
variable.
Settings:
A check on
graph, they will be plotted simultaneously when producing the graph.
A check on
rather than a set of individual points.
A check on
will be separated by that many pixels.
Tick
The default value for both by
Soft key menu options:
Use @EDIT to edit functions of values in the selected field.
Use @CHOOS to select the type of plot to use when the
highlighted. For the current exercises, we want this field set to FUNCTION.
Note: the soft menu keys @EDIT and @CHOOS are not available at the same
time. One or the other will be selected depending on which input field is
highlighted.
Press the AXES soft menu key to select or deselect the plotting of axes in
the graph. If the option 'plot axes' is selected, a square dot will appear in
the key label: @AXES . Absence of the square dot indicates that axes will
not be plotted in the graph.
Use @ERASE to erase any graph currently existing in the graphics display
window.
Use @DRAW to produce the graph according to the current contents of PPAR
for the equations listed in the PLOT-FUNCTION window.
Press L to access the second set of soft menu keys in this screen.
Use @RESET to reset any selected field to its default value.
to
TYPE FUNCTION
means that if you have two or more plots in the same
_Simult
means that the curve will be a continuous curve
_Connect
means that the marks indicated by
_Pixels
, and enter the name of the independent
and
H-Tick V-Tick
H-Tick
is 10.
field is
Type:
Page 12-13
and
V-