Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls - Vizio VO22L HDTV10A User Manual

Chapter 1 Basic Controls and Connections

1.1 Front Panel

POWER 'VIZIO' LIGHT– The VIZIO name lights white when
powered on and orange when powered off.
REMOTE CONTROL SENSOR – This is the window
through which all of the remote control signals pass to the
sensor. Point the remote control directly at this window for
the best response to the remote signal.

1.2 Side Panel Controls

POWER ( ) – Switch the VO22L HDTV10A on by pressing
the button once. Press the button again to the VO22L
HDTV10A off.
MENU – This button activates the On Screen Display (OSD).
If a sub-menu is active, pressing this button will return to the
previous menu level.
CH + / - – Use these buttons to step up or down the TV
channels. While the OSD is active, these buttons function as
up and down controls in the OSD menus.
VOL + / - – Use these buttons
to increase or decrease to the
speaker volume. While the
OSD is active, these buttons
function as left and right
controls in the OSD menus.
INPUT (ENTER) – Repeated
pressing of this buttons steps
through the input sources in
the following sequence: TV,
AV/S-Video, Component,
RGB, HDMI 1 and HDMI 2.
Once you have
through the entire sequence, you will return to the beginning.
Additionally, when the OSD is active, this button confirms the menu function to be adjusted. When the
OSD is not active, pressing this button will display the current input mode.
Version 7/22/2008
stepped
www.VIZIO.com
VIZIO VO22L HDTV10A User Manual
12