HP 49g+ User Manual page 20

1./3.*3.
———————
/23.Q3™™™+!¸2.5`
After pressing `the calculator displays the expression:
√ (3.*(5.-1/(3.*3.))/(23.^3+EXP(2.5))
Pressing `again will provide the following value (accept Approx. mode on,
if asked, by pressing !!@@OK#@):
You could also type the expression directly into the display without using the
equation writer, as follows:
R!Ü3.*!Ü5.-
1/3.*3.™
/23.Q3+!¸2.5`
to obtain the same result.
Change the operating mode to RPN by first pressing the H button. Select
the RPN operating mode by either using the \key, or pressing the @CHOOSE
soft menu key. Press the !!@@OK#@ F soft menu key to complete the operation.
The display, for the RPN mode looks as follows:
Notice that the display shows several levels of output labeled, from bottom to
top, as 1, 2, 3, etc. This is referred to as the stack of the calculator. The
Page 1-8