Building Your Own Table Of Numbers - HP 39gs User Manual

Building your own table of numbers

Build a table
Clear data
Aplets and their views
The default NUMTYPE is "Automatic", which fills the table
with data for regular intervals of the independent (X, T, θ,
or N) variable. With the NUMTYPE option set to "Build
Your Own", you fill the table yourself by typing in the
independent-variable values you want. The dependent
values are then calculated and displayed.
1. Start with an expression defined (in Symbolic view) in
the aplet of your choice. Note: Function, Polar,
Parametric, and Sequence aplets only.
2. In the Numeric Setup (
NUMTYPE: Build Your Own.
3. Open the Numeric view (
4. Clear existing data in the table (
5. Enter the independent values in the left-hand column.
Type in a number and press
to enter them in order, because the
can rearrange them. To insert a number between two
others, use
You enter
numbers into
the X column
Press
CLEAR
NUM
).
.
,
to erase the data from a table.
), choose
).
CLEAR
. You do not have
function
F1 and F2
entries are
generated
automatically
2-19