Table of Contents
Advertisement
If the handset does not find an infrared-capable device, it changes
the right soft key (
Press
(
)
+
START
To break the infrared data connection, press
You can also move the device away from the handset, turn off the
device, or turn off the handset. If your handset moves away from a
connected device while it is still on, it will try to re-connect for 30
seconds after the connection breaks.
Setting Up a Bluetooth Connection
Before connecting your handset to another Bluetooth device, set up
the other device as described in its user guide.
For a PC, set up the Bluetooth accessory card, card drivers, and
application software. If you want to use Dial-up Networking
Services, configure them for the Bluetooth modem as described in
the software and modem user guides.
Notes:
• Your handset must be within 33 feet (10 metres) of the other
device. Nothing can block the line of sight between the two
devices.
• You cannot set up a connection when a serial cable is
attached to your handset.
Connecting a Computer for a Data Call
Prepare your computer to set up the Bluetooth connection, then
make your handset available for the connection:
Find the Feature
) from
+
STOP
To
try another connection
M
to
.
START
STOP
>
>
Connection
Bluetooth Link
>
>
Setup
Find Me
Getting More Out of Your Handset - 127
(
).
+
Advertisement
Table of Contents
