Brother HL-1110 Product Safety Manual page 16

Important Information for Some Countries
Important Safety Instructions
1 This product is equipped with a three-wire grounded plug, a plug having two or three pins. This
plug will fit into only an earthed power outlet. This is a safety feature. If you are unable to insert
the plug into the outlet, contact your electrician to replace your obsolete outlet. DO NOT defeat
the purpose of the earthed plug.
2 DO NOT place anything on top of the power cord including this product. DO NOT allow the
power cord to be stepped on.
3 DO NOT touch a document during printing.
4 Never push objects of any kind into this product through cabinet slots, since they may touch
dangerous voltage points or short out parts resulting in the risk of fire or electric shock. Never
spill liquid of any kind on the product.
5 Unplug this product from the wall outlet and refer servicing to Authorized Service Personnel
under the following conditions:
 If the power cord is damaged or frayed.
If the product has been spilled by liquid.

 If the product has been exposed to rain or water.
 If the product does not operate normally when the operating instructions are followed.
Adjust only those controls that are covered by the operating instructions. Incorrect
adjustment of other controls may result in damage and will often require extensive work by
a qualified technician to restore the product to normal operation.
 If the product has been dropped or the casing has been damaged.
 If the product exhibits a distinct change in performance, indicating a need for service.
6 For Singapore only
We DO NOT recommend using ethylated spirits to clean or contact with the product.
WARNING
For protection against the risk of electrical shock, always disconnect all cables from the wall
outlet before servicing, modifying or installing the equipment.
IMPORTANT
• This equipment may not be used on coin service lines provided by the telephone company or
connected to party lines. (MFC only)
16
1
1