Search The Available Stations (Scan); Station Logos; Traffic Programme - Skoda Infotainment Radio Bolero Owner's Manual

You can switch between groups of individual preset buttons using the function
keys
C.

Search the available stations (Scan)


First read and observe the introductory information given on page 21.
This function shows all the receivable stations in succession, each for a few sec-
onds.
Switching on
›
Press the button » Fig. 1 on page 5.
2
or
›
press the  → Scan button.
Switching off
›
Press the button .
2
or
›
Press any function key in the device screen.
After switching off the function, the device receives the station at which the
function was stopped.

Station logos


First read and observe the introductory information given on page 21.
With the preset buttons » Fig. 12
(B
the radio station can be assigned.
Store the station logo automatically (FM / DAB)
›
Before you save the radio station to a station button press the  → Advanced
setup function key.
›
Activate the menu item Auto-save station logos
and » page 25, Advanced settings (DAB) .
when you save the station to a station button, the station is also assigned a logo
from the device memory if the logo is available in the memory.
on page 21 ) the associated logos (images) of
» page 25, Advanced settings
Storing station logos manually
For the previously stored stations a logo can be assigned manually.

›
Press the function key  → Station logos.
A menu with preset buttons for radio stations is displayed.
›
Press the station button for the station which is to be assigned a logo.
A menu for data media (CD, SD card, USB) is displayed.
›
The desired image is to be selected in the corresponding data media.
Selecting the image causes this to be assigned to the corresponding station.
Note
The following image formats are supported: jpg, gif, png, bmp.
■
We recommend a resolution of up to 500 x 500 pixels.
■

Traffic programme


First read and observe the introductory information given on page 21.
During playback in the media menu the traffic information from the last selected
radio station is received.

If this radio station does not support traffic reports or the signal is not available,
then the device automatically searches for a TP station.
Switching on/off
›
Press the function key  .
›
Enable or disable the menu item Traffic programme (TP).
Traffic reports
During a traffic announcement, the following menu is displayed:
›
Cancel - interruption of the current traffic report. The TP function remains acti-
vated.
›
Deactivate - Exit the current traffic report and turn off the TP function.
Note
Some radio stations misleadingly identify themselves as traffic programs. It is
therefore not a device error that with such radio stations, no traffic news exist.


23
Radio