Set Time And Day; Select Fan Setting (Auto/On); Select System Setting (Heat/Cool) - Honeywell FocusPRO TH6000 Series Operating Manual

This thermostat is ready to go! About your new thermostat
Your new thermostat is pre-programmed and ready to go. All you have to do is set
the time and day. Then check the settings below and change if needed:
1. Set time and day (required for proper operation) .........................See page 6
2. Select fan setting (Auto/On): Preset to Auto .................To change, see page 7
3. Select system setting (Heat/Cool): Preset to Heat ......To change, see page 8
4. Program schedules: Preset to energy-saving levels while you're at work or
asleep (assumes you wake at 6 am, leave at 8 am, return at 6 pm and go to
bed at 10 pm) ...............................................................To change, see pages 9-11
You can override the program schedule at any time, and manually adjust the temperature
(see pages 12-13).
3
FocusPRO TH6000 Series
®
69-1921EFS—03