Memory - MSI H61MU-E35 series User Manual

MS-7680 Mainboard MS-7680 Mainboard

Memory

These DIMM slots are used for installing memory modules. For more information on
compatible components, please visit http://www.msi.com/service/test-report
DDR3
240-pin, 1.5V
Dual-Channel mode Population Rule
In Dual-Channel mode, the memory modules can transmit and receive data with two
data bus lines simultaneously. Enabling Dual-Channel mode can enhance the system
performance. The following illustrations explain the population rules for Dual-Channel
mode.
Important
• DDR3 memory modules are not interchangeable with DDR2, and the DDR3 standard
is not backwards compatible. You should always install DDR3 memory modules in
the DDR3 DIMM slots.
• In Dual-Channel mode, make sure that you install memory modules of the same type
and density in different channel DIMM slots.
Due to the chipset resource deployment, the system density will only be detected up
•
to 15+GB (not full 16GB) when each DIMM is installed with a 8GB memory module.
En-10
48x2=96 pin 72x2=144 pin
DIMM1
DIMM2
Installed
Empty