How to use washer
■
Options
Medic Rinse
For best results or for cleaner rinsing.
This allows the final rinse to be heated to 40
degrees.
1. Press the Power button.
2. Select a cycle.
3. Touch the Medic Rinse button and set time
required.
4. Press the Start/Pause button.
Wash
• Time Save : This option can be used to
reduce the time of a wash program.
It is best used on lightly soiled loads.
• Intensive : If a normal load is heavily soiled,
"Intensive" option is effective.
Temp.
• By touching the Temp. button the water
temperature can be selected.
- Cold
- 30°C, 40°C, 60°C, 95°C
• Water temperature selection is limited in
certain programs.
Rinse
• R + +Hold : Add rinse once then after rinsing
process, the course is paused until start
button is pressed again.
• N+Hold : The course is paused until start
button is pressed again when rinse is
finished.
• Rinse ++ : Add rinse twice.
• Rinse + : Add rinse once.
Spin
• Spin Speed level can be selected by
touching 'Spin' button repeatedly.
Rinse+Spin
This can be helpful in preventing fresh stains
from setting in fabrics.
This is a separate cycle.
1. Press the Power button.
2. Select a cycle.
3. Touch the Option button
(Rinse+Spin light up).
4. Press the Start/Pause.
• The cycle chosen determines the amount of
Rinses and their duration as well as the spin
during for this function.
■
Other functions
Spin Only
1. Press the Power button.
2. Touch the Spin button to select RPM.
3. Press the Start/Pause.
NOTE
When you select "No Spin", it will still
rotate for a short time with low speed to
drain quickly.
23