Philips AquaTrio FC7070 User Manual page 28

Problem
The tank full/tank
empty light lights
up continuously
and the appliance
switches off while
flushing the mop-
ping nozzle.
I cannot move
the appliance
forwards or
backwards.
I cannot find the
vacuum cleaning
function.
Note:
D
If the above solutions did not solve your problem, please visit www.philips.com/support or contact the
Philips Consumer Care Centre in your country.
28
Possible cause
The dirty water tank is
full.
One or more wheels
may be blocked by a
small object.
There is no separate
vacuum cleaning function.
Solution
Empty the dirty water tank (see chapter 'Using your
AquaTrio', section 'Emptying the dirty water tank')
and start the flushing procedure again (see chapter
'Cleaning and maintenance', section 'Flushing your
AquaTrio').
Switch off and unplug the appliance and then put it
on its side. Make sure the dirty water tank is empty
when you put the appliance on its side, otherwise
wastewater may leak out of the dirty water tank.
Check what is blocking the wheel(s). Remove any
object that could block the wheel(s). Put the appli-
ance upright again and resume cleaning.
When you switch on the appliance, the mopping
and the vacuum cleaning functions work at the same
time.