HP xw4300 Quickspecs page 23

QuickSpecs
Technical Specifications
Thermal Alert (Requires
HP Client Manager
Software)
Remote ROM Flash
Remote Wakeup
ACPI (Advanced
Configuration and Power
Management Interface)
SMBIOS
ROM revision levels
System board revision
level
Ownership Tag
Industry Standard
ACPI
ASF
ATA (IDE)
ATAPI
BBS
BIOS 32-bit Services
CD Boot
EDD
EHCI
PCI
PCI Express
PMM
SATA
SMBIOS
SPD
TPM
UHCI
USB 1.1
USB 2.0
Monitors the temperature state within the chassis. Three modes:
NORMAL - normal temperature ranges
ALERTED - excessive temperatures are detected. Raises a flag so action can be taken to
avoid shutdown or provide for a smoother system shutdown
SHUTDOWN - excessive temperatures are encountered. Automatically shuts down the
computer without warning before hardware component damage occurs
Provides secure, fail-safe ROM image management from a central network console
System administrators can power on, restart, and power off a client computer from a remote
location.
Allows the system to enter and resume from low power modes (sleep states)
Controls system power consumption, making it possible to place individual cards and
peripherals in a low-power or powered-off state without affecting other elements of the
system
Supports ACPI 2.0 for full compatibility with 64-bit operating systems
System Management BIOS 2.3.5, previously known as DMI BIOS, for system management
information
Identifies system ROM revision levels and reports in Computer Setup Utility (F10).
Version is stored in an industry standard memory location (SMBIOS) so that management SW
applications can use and report this information
Allows management SW to read revision level of the system board
Revision level is digitally encoded into the HW and cannot be modified
A user-defined string stored in non-volatile memory that is displayed in the BIOS splash screen
Revision Supported by the BIOS
Advanced Configuration and Power Management Interface, Version 2.0
Alert Standard Format Specification, Version 2.0
AT Attachment 6 with Packet Interface (ATA/ATAPI-6), Revision 3b
ATAPI Removable Media Device BIOS Specification Version 1.0
BIOS Boot Specification v1.01
Standard BIOS 32-bit Service Directory Proposal
"El Torrito" Bootable CD-ROM Format Specification Version 1.0
Enhanced Disk Drive Specification Version 1.1
BIOS Enhanced Disk Drive Specification Version 3.0
Enhanced Host Controller Interface for Universal Serial Bus, Revision 1.0
PCI Local Bus Specification, Revision 2.3
PCI Power Management Specification, Revision 1.1
PCI Firmware Specification, Revision 3.0, Draft .7
PCI Express Base Specification, Revision 1.0a
POST Memory Manager Specification, Version 1.01
Serial ATA Specification, Revision 1.0a
Serial ATA 3 Gb/s: Extensions to Serial ATA 1.5 Gb/s, Revision 1.0
System Management BIOS Reference Specification, Version 2.4
PC SDRAM Serial Presence Detect (SPD) Specification, Revision 1.2B
Trusted Computing Group TPM Specification Version 1.2
Universal Host Controller Interface Design Guide, Revision 1.1
Universal Serial Bus Revision 1.1 Specification
Universal Serial Bus Revision 2.0 Specification
DA - 12260 Worldwide — Version 22 — May 25, 2007
HP xw4300 Workstation
Page 23