Option Bar; More Options; Speed Control - Pfaff Creative 4.0 Owner's Manual

Option bar

More options (10)

Monochrome (A)
Touch the icon to activate monochrome
embroidery. All designs are shown in a grey color
and the machine does not stop for color block
changes. To deactivate monochrome embroidery,
touch the icon again.
Full screen (B)
To see your design as large as possible, use the full
screen function. The embroidery will ll the whole
screen. To close, touch the screen once.
3-dimensional view (C)
Touch the 3-dimensional view icon (C) to turn on
or off a 3-dimensional view of the designs in the
embroidery eld.
By default, the designs are displayed in
2-dimensional view in the embroidery eld. In
2-dimensional view, the designs load faster on the
screen and it is easier to see the color blocks in the
design. The view setting remains as selected even
when you turn your machine off.
Save current state (D)
If you want to stop embroidering and save your
current position, touch Start/Stop to stop the
embroidery. Then touch the Save current state icon
to save the current position. You can now turn the
machine off.
When saving current state, all your adjustments are
stored and you can continue to embroider later. A
current state is saved until you replace it.
Note: If you have chosen AutoSave current state in the
Settings menu, this icon will be disabled, and current
state is stored periodically.

Speed control (11)

This function enables you to easily reduce the
maximum embroidery speed. Just touch the speed
control icon to reduce the speed. To return to
normal speed, deselect the icon.
You can change the set speed limit. Long touch the
speed control icon to get a pop-up. Set the speed
limit you would like by sliding the button right
or left and then close the pop-up. The next time
you touch the speed control icon, the speed will be
reduced to the limit you have chosen.
You can embroider without closing the pop-up.
9:4
11
Note: If selecting the highest speed in the slider, it is like
choosing no speed limit at all. The icon in the option bar
will then be deselected and the speed limit will be set to
default.
A
10
B
C
D