Viewing & Deleting Images - Stealth Cam STC-DVIRHD User Manual

Viewing and deleting the images
The STC-DVIRHD cam offers the user different options for
viewing the images. The external LCD display on the front of
the housing will show the number of images in memory.
To wake the camera from PIR detection mode, press and
hold either the [UP] or [DN] button for about 5 seconds.
The instructions below are based on starting from a camera
that is turned off.
Viewing the image on a handheld LCD TV video monitor or
your home TV equipped with an RCA input jack.
For viewing on handheld LCD TV, attach the appropriate cable to
the video out jack on the camera. Insert the other end into the
video in jack on handheld LCD TV monitor.
For viewing on home TV, attach the appropriate cable to the
video out jack on the camera. Insert the other end into the RCA
video in jack on the TV. Make sure to switch to VIDEO IN
mode on your TV. (See your TV owner's manual for
directions).
www.stealthcam.net
STC-DVIRHD
Toll Free 877-269-8490
25