Loading And Using The Washer; Sorting Wash Loads; Proper Use Of Detergent; Care And Cleaning Of The Washer - Hotpoint VBXR1060 Owner's Manual

Loading and using the washer.

Sorting Wash Loads

Colors
Whites
Lights
Darks

Proper Use of Detergent

Add detergent and start the washer before adding
clothes so that the detergent can work effectively.
Using too little or too much detergent is a common
cause of laundry problems.

Loading the Washer

Load dry items loosely, no higher than the top
row of holes in the washer tub. When loading wet
items make sure you set the load/water level high
enough to allow the items to move freely. Water
level should just cover the clothes. To add items
after washer has started, push in Cycle knob and
submerge additional items next to the agitator.
Close the lid and pull Cycle knob out to restart.

Care and Cleaning of the Washer

Wash Basket: Leave the lid open after washing to
allow moisture to evaporate. If you want to clean the
basket use a clean soft cloth dampened with liquid
detergent, then rinse. (Do not use harsh or gritty
cleaners.)
Fill Hoses: Hoses connecting washer to faucet should
be replaced every 5 years.
Lint Filter: The lint filter is located under the agitator.
It is self-cleaning and requires no maintenance.
10
Always follow fabric manufacturer's care label when laundering.
Soil Fabric
Heavy Delicates
Normal Easy Care
Light Sturdy Cottons
Lint
Lint Producers
Lint Collectors
You can use less detergent if you have soft water, a
smaller load, or a lightly soiled load.
Do not wrap large items like sheets around the
agitator.
Do not wash fabrics containing flammable
materials (waxes, cleaning fluids, etc.).
Agitation will not start with the lid up.
Exterior: Immediately wipe off any spills. Wipe with
damp cloth. Try not to hit surface with sharp objects.
Moving and Storage: Ask the service technician to
remove water from drain pump and hoses. Do not
store the washer where it will be exposed to the
weather. Before moving, the shipping rod must be
reinstalled. The shipping rod keeps the tub stationary
and prevents damage to the washer. Refer to the
Installation Instructions that came with your washer
for the correct positioning of the shipping rod.
Long Vacations: Be sure water supply is shut off at
faucets. Drain all water from hoses if weather will be
below freezing.