Digital Audio Connector (4-1 Pin Spdif_Out) - Asus A88XM-E User Manual

4. Serial ATA 6.0 Gb/s connectors (7-pin SATA6G 1~6)
These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard
disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you
can create a RAID 0, RAID 1, RAID 5, RAID 10 and JBOD configuration through the
onboard controller.
A88XM-E
A88XM-E SATA 6.0Gb/s connectors
• These connectors are set to AHCI mode by default. If you intend to create a Serial
ATA RAID set using these connectors, set the type of the SATA connectors in the
BIOS to [RAID]. See section 2.6.2 SATA Configuration for details.
• You must install Windows
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows
• When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to
[AHCI]. See section 2.6.2 SATA Configuration for details.
5.

Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port.
A88XM-E
A88XM-E Digital audio connector
The S/PDIF module is purchased separately.
ASUS A88XM-E
SATA6G_1 SATA6G_2
XP Service Pack 3 or later version before using Serial
®
XP SP3 or later version.
®
SPDIF_OUT
SATA6G_6
GND
RSATA_RXP6
RSATA_RXN6
GND
RSATA_TXN6
RSATA_TXP6
GND
SATA6G_5
GND
RSATA_RXP5
RSATA_RXN5
GND
RSATA_TXN5
RSATA_TXP5
GND
SATA6G_4
GND
RSATA_RXP4
RSATA_RXN4
SATA6G_3
GND
RSATA_TXN4
RSATA_TXP4
GND
1-17