Wireless Resource Control - D-Link DAP-2695 User Manual

D-Link DAP-2695 User Manual
The Wireless Resource Control window is used to configure the wireless connection settings so that the device can detect the better wireless
connection in your environment.
Wireless band: Select 2.4GHz or 5GHz.
5G Preferred: Use the drop-down menu to Enable the 5G Pre-
ferred function. When the wireless clients support
both 2.4GHz and 5GHz and the 2.4GHz signal
is not strong enough, the device will use 5G as
higher priority.
5G Preferred Age: Enter the time in seconds to specify the interval
of updating information.
5G Preferred Diff: The 5G preferred difference value is equal to
the number of 5GHz wireless client connections
minus the number of 2.4GHz wireless client con-
nections. If the number of 5GHz wireless client
connections minus the number of 2.4GHz wire-
less client connections exceed this value, the
extra 5GHz wireless client connections will be
forced to connect to the 2.4GHz band and not
the 5GHz band.
5G Preferred Refuse Enter the maximum 5G connection attempts allowed before the 5G preferred function will be disabled for the wireless
Num: station connection.
5G Preferred RSSI: Select a percentage of RSSI. When the RSSI of 2.4GHz is lower than the percentage, the wireless client connection will
use 5GHz band.
Select Enable or Disable. This is an option for load balancing. This determines whether to limit the number of users
Connection Limit:
accessing this device. The exact number is entered in the User Limit field below. This feature allows the user to share the
wireless network traffic and the client using multiple APs. If this function is enabled and when the number of users ex-
ceeds this value, or the network utilization of this AP exceeds the percentage that has been specified, the DAP-2695 will
not allow clients to associate with the AP.

Wireless Resource Control

26