Turning On The Power - Hitachi CP-X880 User Manual

TURNING ON THE POWER

Precautions
Connect all devices to be used to the projector prior to turning on the power.
WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.
LASER
INDICATOR
STANDBY/ON VIDEO RGB
UP
FOCUS ZOOM PAGE
DOWN
BLANK LASER
Control panel
INPUT
RGB
KEYSTONE
BNC
ONE TOUCH
DVI
FOCUS
VIDEO
RESET
S-VIDEO
MENU
COMPONENT
STANDBY/ON TENP LANP
NOTE
Turn the
power on/off in
right order.
• Power on the
projector before the
computer or video
tape recorder.
• Power off the
projector after the
computer or video
tape recorder.
Make sure that the power cord is firmly and
1
correctly connected to the projector and outlet
Turn on the projector's power
2
Set the power switch to [ | ] (ON). The STANDBY/ON
indicator will light to solid orange.
STANDBY/ON indicator
ZOOM
Press the STANDBY/ON button (control
3
panel or remote control)
• The projector begins warming up and the
STANDBY/ON indicator blinks green.
• The STANDBY/ON indicator stops blinking
and lights to solid green once the
projector's power is completely on.
Remove the lens cap
4
The picture is projected.
power switch
STANDBY/ON
15